As an Amazon Associate I earn from qualifying purchases from

Easy methods to Switch a Picture to Wooden (BEST Manner + Suggestions)

In case you’re searching for a enjoyable challenge or an awesome present concept, you’re going to like this system…

On this article, I’m going to point out you find out how to switch images onto picket objects.

This can be a step-by-step information to switch laser-printed images utilizing a product referred to as Mod Podge.

Nevertheless, I’ll additionally cowl a few different picture switch strategies should you don’t have a laser printer or Mod Podge.

So decide your favorite images and let’s get to it!

DIY Picture Switch to Wooden: What You’ll Want

Materials needed to do a photo transfer from laser printer paper to wood

Transferring images to wooden shouldn’t be tough, however the course of wants a few days. Take this under consideration earlier than you begin the challenge.

Right here’s what you’ll have to switch images to wooden:

  • Mod Podge Photo Transfer Medium – it’s also possible to strive making your individual Mod Podge picture switch medium utilizing 2 elements Elmer’s glue or low-cost white PVA glue and 1 half water.
  • A picket object – it may be a board, a jewellery chest, or the rest you need to switch your picture to.
  • Brush / Curler – I like to make use of a sponge curler to unfold the Mod Podge, however a sponge brush or a daily brush will work too.
  • Laserjet printed picture – select any picture you need to switch (colour or black and white, it doesn’t matter). It must be printed on common paper with a laserjet printer.
  • Scissors / Cutter
  • Material / Rag – it doesn’t must be from any particular materials; any previous rag will do.
  • Mat – the mat can be used as a working floor. In case you don’t have one, you may simply cowl the ground or the desk with some plastic or wax paper to guard it.
  • Plastic card – that is to push out all of the air bubbles. You should use a kitchen curler and even your fingers, however a plastic card works greatest.
  • Sandpaper (elective) – that is to offer it a extra rustic look, it’s not mandatory for the switch.

What’s the Greatest Method to Switch a Picture to Wooden?

1. Get the picket object

Wooden cutting board

The very first thing that you must do is discover a picket object to switch your favourite picture to.

It may be a wooden slice, an unfinished craft clock, a jewellery field, a picket panel, and so forth.

On this case, I’m going to make use of a chopping board to brighten the kitchen.

2. Put together the picture and print it

Exporting a photo

The subsequent step in doing a photograph switch to wooden is to prepared your precise picture.

You’ll be able to select any picture printed on laserjet – I’m utilizing a picture from Inga Seliverstova. In case you don’t have a laser printer, you may print the picture on an inkjet printer after which make a photocopy of it at any library, stationery retailer, and so forth.

Inkjet works simply wonderful, however you could get sharper outcomes with laserjet, relying on the wooden grain you switch images to.

Earlier than you print the photo, that you must make a couple of preparations. First, make certain it’s the right measurement for the wooden. If it’s not, you should utilize Photoshop or another picture modifying software program to resize it.

Keep in mind that your chosen picture will switch to the wooden as a mirror picture. If you wish to preserve it precisely as you see it in your laptop, you need to flip it earlier than printing.

If there’s any textual content within the picture, that is tremendous necessary because the mirror image will present your textual content backwards. If not, then it’s your selection if you’d like it as it’s or mirrored.

In any case, you may flip it utilizing picture modifying software program.

Now print your picture on common printer paper – don’t use picture paper.

3. Minimize it

Paper cut to size of wood

In case your picture doesn’t have the precise form or has white borders, lower it all the way down to the dimensions and form you want for the wooden switch.

4. Cowl it with Mod Podge

Applying modge podge atop wax paper

Now that you must cowl the picture with a beneficiant quantity of the picture switch medium – on this case, the Mod Podge.

The best way you do that is totally as much as you. Be at liberty to pour it onto the picture after which unfold it, or you may dip the froth brush and slowly distribute it.

In case you do the latter, ensure you do a couple of passes to essentially cowl the paper – don’t fear should you don’t see the picture anymore. It ought to look all white, similar to it does within the above picture.

5. Place it on the wooden

Applying a printed photo to a wooden board

For the reason that paper is all moist with the Mod Podge, it’s going to be a bit flimsy – so, decide it up gently.

Now, place it face down onto the wooden. Attempt to be as correct as attainable as a result of it’s higher should you don’t need to reposition it.

It doesn’t need to be good, although. Remember the fact that you’re going for a home made rustic look, and any imperfections will look wonderful towards the wooden grain anyway

6. Push out the air bubbles

Sticking down the image

After getting it in place, that you must push out any air bubbles. Air bubbles could make a photograph switch to wooden end up patchy and incomplete.

You are able to do a superb job simply by rubbing your hand from one edge to the opposite – though utilizing a rolling pin or perhaps a plastic card makes issues simpler.

As you may see within the picture, I had already taken the picket board off the wax paper, considering the messy half was over – unhealthy concept! While you push the air out, you’ll even be taking out any extra Mod Podge.

Take my phrase for it – you need to do that a part of the method whereas your working space remains to be coated. It is determined by how a lot Mod Podge you used, after all – nevertheless it’s higher to be protected than sorry.

7. Wait till it dries

Photo glued to wooden object

Properly, that’s it for now. You’ll be able to’t do the rest till your wooden switch is totally dry.

The period of time it takes relies upon a bit on the climate and humidity within the air. To be on the protected facet, go away it for twenty-four hours.

You’ll be able to inform that it’s prepared by touching it, after all – but in addition as a result of it appears to be like like common white paper once more.

You gained’t be capable to see the picture, and the colour is just about uniform all through your entire paper (as you may see within the above image).

8. Put a moist material on it

Cloth wetting the printed image

Now that you must get it moist once more – I do know, it sounds bizarre. Nevertheless, when the Mod Podge dried, it transferred the ink to the wooden – what you are actually doing is getting the paper moist to take it off the wooden, leaving the picture behind.

About 15 to twenty minutes with a moist washcloth on high of it must be sufficient.

Discover how the paper turns into extra clear, and you can begin to see the picture – that’s when you may transfer on to the subsequent step.

9. Peel it off

Removing the paper from the board

Gently rub the paper to peel it off. If it’s not coming off, you need to moisten it just a little extra – don’t attempt to drive it, or the picture would possibly come off too.

Hold doing the identical course of a couple of instances till you see there’s no extra paper on it.

10. Sand it (elective)

Photo transfer with sanded edges for rustic effect

If you wish to give it extra of a country look, you should utilize sandpaper on the image’s edges. Simply sufficient to see the wooden grain mix with the picture.

You’ll be able to rub the sandpaper on high of the picture to make it seem like an old photo – simply do it very gently. It’s higher to repeat the method a couple of instances than to be too aggressive and damage the challenge.

Ensure you do that outdoors or on a floor that’s simple to scrub – should you do it on a rug or a carpet, you’ll get sawdust throughout it.

This step is totally elective, although. If you wish to have a extra outlined picture, skip on to the subsequent step.

11. Give a ending coat of Mod Podge

Applying final coat of mod podge

You’re performed – that’s how simple it’s transferring images onto wooden!

To make your picture last more, you may put a high layer of Mod Podge to seal it in. A skinny layer is sufficient – you don’t need to cowl it as a lot as you probably did to switch the picture.

How do I Switch an Inkjet Picture to Wooden?


To switch an inkjet picture to wooden, that you must print on a kind of silicone-coated paper. For instance, the paper stickers are caught onto once you purchase them. You should purchase inkjet stickers and preserve the A4 silicone coated paper after you’ve used them.

Hold the picket floor at hand since you’re going to make the switch proper after you print. It doesn’t matter what you select – it may be a bit of plywood.

Now, peel off the labels and feed your inkjet printer the silicone-coated paper. You’ll have to print on the facet that had the labels initially and never the again.

Decide it up from the printer with out touching the printed picture as a result of the ink is contemporary, and you possibly can smudge the picture. Now, put it on the plywood – the printed facet must be going through all the way down to switch the ink onto the wooden.

That’s it. Cross your hand on high or a rolling pin simply to verify your entire picture is transferred.

To protect your picture, you would possibly need to use a sealing product – you should utilize Mod Podge as a sealer (it is available in matte and shiny ending) or spray lacquer.

Are you able to iron photographs onto wooden?


Sure, you may iron photographs onto wooden should you use laserjet printed images. Select the image you need to switch and mirror the picture earlier than you print it – in the identical approach as the opposite strategies.

Place the print going through down on the wooden – you may tape the picture alongside one edge to maintain it in place. Additionally, this can work as a hinge to verify on the progress and iron it once more if mandatory. In any other case, it might be unimaginable to maintain it in the identical place.

All that you must do now could be begin ironing to heat your entire picture – attempt to do it as uniformly as attainable. As soon as it’s scorching, decide up a nook and slowly raise it – when you do that, you need to nonetheless be ironing the remainder of the image.

Watch out to not burn your self once you do that. Making a photograph switch to wooden is a good household challenge, however utilizing this system shouldn’t be the most effective should you’re doing it with babies.

Remaining Phrases

As you may see, there are numerous methods to do a DIY picture switch to wooden, they usually’re all pretty simple to do.

The primary methodology takes just a little little bit of time – however as you may see, the result’s price it!

Give it a strive, and tell us you probably have any questions or doubts about find out how to switch images to wooden.

We will be happy to hear your thoughts

Leave a reply

Enable registration in settings - general
Compare items
  • Total (0)
Shopping cart