As an Amazon Associate I earn from qualifying purchases from

Gigabyte FV43U Gaming Monitor Evaluation 2021

Nice colours and wonderful image high quality are two of the principle components that assist create immersion whilst you’re gaming. Regardless of the significance of excellent coloration, monitor producers don’t at all times calibrate the colour of their panels to what’s deemed correct inside particular coloration spectrums – sRGB/Rec.709 for instance.

We like to check every monitor for coloration copy to see how they’d carry out in color-accurate situations.

Listed here are the outcomes for the Gigabyte FV43U.

NOTE: Gigabyte has pre-calibrated this monitor to a median DeltaE <2 – see picture under

Color calibration factory report FV43U

Like at all times, we began the colour accuracy efficiency part by operating a preliminary take a look at on the FV43U proper out of the field. For this monitor, the ‘Customary Mode’ preset was put in, setting the brightness to 152.77 candelas – barely over the advisable luminance for on a regular basis utilization.

Wanting on the outcomes above, the Gigabyte did appear just a little disappointing when in comparison with the IDEAL figures. For a begin, the White level measured in at 7478K, virtually 1000 over the 6500K best. That mentioned, black depth was fairly spectacular, leading to a 0.0353 rating. Distinction ratio was above the marketed specs (4331:1), however common deltaE fell in need of the mark, solely providing a median of three.82 – making the ‘Customary mode’ preset poor for any type of color-accurate work. Gamma measured in at 2.25.

I made a decision to load the factory-calibrated sRGB preset hoping for higher outcomes. As you may see, the FV43U did develop into rather more correct on this coloration mode. We measured a 1.75 common deltaE which, regardless of not being the very best we’ve ever examined, was nonetheless underneath the <2 that Gigabyte specified. White level was nonetheless poor and distinction ratio took a dip to 3688:1. That mentioned, black depth was nonetheless stable at 7820K. Gamma measured in at 2.29.

There was a tonne of different presets contained in the monitor’s OSD, however few supplied accuracy that was near the sRGB spectrum. That mentioned, we did take some notes on the preset that are under:

FPS – The FPS mode supplied up a blueish hue and extra saturation within the blue and inexperienced areas. The colours weren’t practically as correct because the sRGB preset, however FPS did off good distinction for probably the most half.

RTS/RPG – This coloration mode was probably the most dramatic, providing up a darker profile that targeted extra on distinction ratio than coloration saturation.

Film Mode – Colours appear to have a slight saturation utilized when in comparison with FPS and RTS modes. The colours appear effectively balanced, providing a extra nice viewing expertise.

After testing the varied presets, I wasted no time and determined to calibrate the panel – recording coloration gamut, panel uniformity, and general coloration accuracy.

I chosen the ‘Consumer’ settings for the calibration, altering the RGB values to 99/87/97. 

Listed here are the outcomes:

Like at all times, after testing the monitor in varied preset modes, we calibrated it to see how correct the colour copy may very well be. As you may see from the graph above, the outcomes had been just a little bit disappointing as soon as once more. Usually we count on to see common deltaE drop to round 0.2-0.4. Nonetheless, for this monitor, the very best we recorded was 1.12 – respectable, however not at all the very best we’ve seen. We nonetheless recorded a most deltaE of three.18 – greater than what’s deemed acceptable for color-accurate work throughout the sRGB spectrum.

That mentioned, black depth and distinction ratio nonetheless remained robust – one thing that isn’t at all times the case after calibration. White level was nonetheless just a little low, however general was an enchancment over out the field and sRGB presets.

Panel Uniformity

Panel uniformity is a take a look at we run to examine how uniform the luminance and coloration is throughout everything of the display. Throughout this take a look at, the middle sq. is used because the reference house. Each different sq. is then examined to see how far it differentiates from the reference.

In a super world, we wish each sq. to be inexperienced, which means it hasn’t damaged the differential threshold – one thing we are able to set firstly of the take a look at.

Word: outcomes will differ from panel to panel.


Panel uniformity FV43U image

The panel uniformity for this monitor was OK however did have some apparent anomalies – as you may see from the outcomes above. The vast majority of the display showcased a ‘inexperienced’ rating – providing good panel uniformity in each luminance and deltaE. The corners had been the apparent anomalies, showcasing poor scores when in comparison with the remainder of the panel. That is pretty customary on VA panels. Nonetheless, with a 30% deviation in luminance, it may well usually be seen by way of the bare eye.

Viewing Angles

Viewing angles had been to be anticipated from a panel of this expertise. The VA expertise doesn’t supply the very best viewing angles, with coloration shift and brightness deviating on a reasonably apparent scale. See video under.

Shade Gamut

As a part of the calibration course of, the DisplayCal will give an correct measurement of the colour gamut the monitor can present. Under are the outcomes of the colour gamut take a look at:

FV43U Color Gamut Measurements


Taking a better have a look at the colour gamut measurements, the FV43U clearly exceeds the sRGB, Adobe RGB, and DCI-P3 spectrums. After calibration, the monitor exceeded 174% sRGB gamut quantity – equating to a 99.5% protection. Each Adobe RGB and DCI-P3 spectrums had been exceeded by 19.9% and 23.3% respectively. That resulted in a 99.6% Adobe RGB and 94.1% DCI-P3 coloration gamut protection.

FV43U Color Gamut Graph

Wanting on the bodily gamut graph, you may see the place on the colour chart the FV43U exceeds the sRGB spectrum – showcased by the dotted line. The FV43U coloration gamut didn’t fairly cowl the blue nook of the sRGB house, usually the case in fashionable LED panels.

Most And Minimal Brightness

We ended the colour accuracy and film high quality testing by checking the utmost brightness, minimal brightness, and 120 candelas factors on this panel. The outcomes are under:

Brightness Candelas
100% Brightness 735.46 cd/m²
0% Brightness 75.21 cd/m²
7 Brightness 120 cd/m²

Calibrated Profile

For individuals who need to use our calibrated coloration profile, one can find a hyperlink under the place you may obtain the zip file.

Textual content Readability

Under is {a photograph} that captures the textual content readability of the FV43U – utilizing Notepad with ClearType on and off.

monitor testing 6

monitor testing 7

We will be happy to hear your thoughts

Leave a reply

Enable registration in settings - general
Compare items
  • Total (0)
Shopping cart